Jump to content
Sign in to follow this  
Curt84328

A few basics for beginners.

Recommended Posts

I have been building layouts for a while, and discover new things to do all the time.   Here are a few tricks or tips for new beginners.

LANDSCAPING track beds.     

Roter Brummer and Bahnland have come up with a way to smooth the embankments on track beds when dealing with 2 tracks at different levels.   I usually lay track on a flat surface and adjust the landscape later.    

0.jpg.1cbf04ce3267777783cb7627ac95fce3.jpg here I have the base level at -70 mm.   (it's a below grade level and there will be levels above it) 

The track was originally at -63 mm.   and was then lowered to -69 mm (1 mm above the base plate)  

I set the terrain level to 100 mm and adjusted the terrain.

1.jpg.820de46d593b251448a25fd4de817050.jpgnow raise the track 1 mm to -68 mm and the terrain to 90 mm and adjust again

2.jpg.cb1fe4091197b31b331646ac24e5f488.jpg3.jpg.edb68df7cc961ba37c659ccf52294297.jpg4.jpg.6cc10a23ab33cb99c6f5ff9c07d6db27.jpgcontinue doing this til you reach the original track level.   Your terrain adjust should be at 40 mm at this point.

raise the track 1 more mm, and by checking the dimensions of the track (this is HO scale) you find that the track is 30 mm wide.

8.jpg.6ac115c99b5495accebf3fc674330642.jpg    set the terrain width to 30 mm and adjust again.  now drop the track 1 mm to original  track height.  looking at a more sideways view, you see the sleepers are part way embedded in the embankment, just like real track.9.thumb.jpg.5738c373125298b213b60336e77f88d0.jpg

EVENT MANAGEMENT

I'm using V4 (too poor to upgrade right now :) )

10.jpg.2adb9419413713072b9e35c87684e7b7.jpg By creating a series of folders and labeling them properly, it is easier to find a particular set of instructions  

11.jpg.a4be968370c9af490125c82cbfe02484.jpg

This is my "repair" train right camera event.  I have a toggle switch in view of the "repair top camera" and by toggling it, it activates the "repair Right Cam" then toggles the toggle switch that activated the right camera, and starts a 15 second timer.   I use the same timer for all cameras on the "repair train" and the instruction reactivates the top camera.

5.jpg

6.jpg

7.jpg

Share this post


Link to post
Share on other sites

Locomotive speed and stopping

MBS has a nice speed control (drehregler / tacho) and a decent stop switch (not aus), but they can take up valuable space if you place them in a cab or control area.

01.thumb.jpg.3ed09f7960551749f360b3f4c164e34e.jpg

if you rescale the Not Aus button to .4 and raise the height by 6 mm, the two pieces fit quite nicely.

02.jpg.fc33d46308c64ead0a4054040c0379d5.jpg

group them for final placement and final scaling then ungroup to connect them to the locomotive.

Share this post


Link to post
Share on other sites

if we carry the last idea one step further, we get this

1.thumb.jpg.c6421e06370d8143372c7447947291bc.jpg

This tiny camera, located in the tender, is aimed at the cockpit of the locomotive.   it shows this view

2.thumb.jpg.24a982d8f03d75286537e1d69b0beaf7.jpg

You have your speed control, stop, and 4 camera controls all handy.  Since the top camera (seen in first picture) is set to track the locomotive, it is always

properly centered.   The left and right camera toggles are for hidden cameras that are aimed out the front side windows.

3.jpg.a8261dc9f21e41dc6b68e43ee1f6f788.jpg

track signal switches are all clickable from the camera views.

 

Share this post


Link to post
Share on other sites
17 hours ago, wopitir said:

Hallo Curt Curt84328

ein Doppel-Click auf den Drehregler (ohne Schalter) stopt die Lokomotive auch. Schalter muss nicht sein.

Gruß
Wolfgang

das ist gut zu wissen, einfacher ist immer besser

 

Share this post


Link to post
Share on other sites

Placing new Logos (service marks) on existing rolling stock for new look

781338751_origloco.thumb.jpg.c556a6be30494a99d52897d1743c80c0.jpg

This is the original locomotive and tender that I used for the passenger train. (original by Seal)

908587870_passengerloco.thumb.jpg.9562fa93b4196b957affe6bd8331c02b.jpg

Here I have added logos on locomotive and tender to cover original markings as well as changing plate on boiler to indicate route.

1696296656_origpasscar.thumb.jpg.002a005f4c5c8b3d7a2055f07d1287bc.jpg

here is the original passenger car.

682560760_Passengercar.thumb.jpg.56e86458e8d58eeca24af5ceb13999d2.jpg

changed the logo on passenger car.

tour.thumb.jpg.441e0c7151233adffd1987c7d6b2e2b8.jpg

another Locomotive and tender and cars.   The Original was Reinhardt's 119 and tender.   Full exchange textures created for this

logo.jpg.9c23811f7f501825662b308c143af4c0.jpg

closeup of Logo on Passenger car (original was by seal)

You can see that small changes can make things look different, and fit better in your layout.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×