Your layout is paused, press SPACE to unpause it.

@r.berni05 ,

You can see here that your layout is paused...

... press play to start...

Note: You can toggle between pause and play using SPACE.

Thanks for your replay, Yes, I did set the train to play, but it still did not move. I gave up. this morning I tried a new very simple layout using elements from the Sample, Still not working. see attached may problem is with my account

Your account is fine and has nothing to do with your problem. Please ensure:

1. That your train has a speed > 0

2. That you unpause your animations (press SPACE until a play symbol is displayed in the center of the screen)

Kind regards,

Neo

vor 31 Minuten schrieb r.berni05:

I did set the train to play, but it still did not move.

Hello @r.berni05 ,

Please make sure the train sits on the track properly. Then

• select the train,

• select the control menu from the bottom bar

• switch on the train engine

• set the desired speed

and the train should move.

I hope this helps?
Goetz

Finally it works,

i did not find that i have to use this command in any help o manual.

select the control menu from the bottom bar

may be I missed it

happy xmas

roberto

hi agiain

now i want to start again. even if i am not very good with Woking with 3d train I have in mind a very big and complex layout. something like 25meters by 25 with 2 layers and many trains, controls and so on. I know it is a long way to accomplish this layout. first question is to create the initial terrain. wich one of this two alternatives should I use ?

vor 4 Minuten schrieb r.berni05:

wich one of this two alternatives should I use ?

It makes no difference which mode you use. It's merely a question of which measurements are more suitable to your needs: The scale model sizes or real world measurements. And you can always switch from one setting to another at any time.

About your plan for a big an complex layout: Learning the ropes is easier and more effective, when you keep things small and simple to begin with.

Bearbeitet Montag um 17:12 Uhr2 Ta von Goetz
spelling mistakes

thank you

look at this. two issues, why is the track disconnected from the terrain, I do I remove the elevated terrain?

Gerade eben schrieb r.berni05:

why is the track disconnected from the terrain

It shouldn't be. But without seeing what you did, I cannot say what caused this in your case.

You can find the terrain manipulation tools in this menu:

here it is

Oh, I see

You're not limited to building on the base plate.

The picture suggests, that you altered the shape of the base plate after laying the first tracks.