Faller AMS cross and insulation

[Leslie]

Please create a mini single faller AMS cross. There is one in existence but this is too big, not usable for me.

And please place plastic dots to all crossing wires at crosses to avoid shortcuts. Turnouts are need only 1 dot.

My set of tracks was black so I had wish to create black variation too. But I had tried to imagine black stripe on black road and I crashed. I think you had similar problems and this caused current color of tracks.

Thank you in advance!

[Roter Brummer]

Beitrag gelöscht, da antworten sinnlos.

Bearbeitet vor 17 Stunden von Roter Brummer

[Leslie]

I had similar black track for sure, so please...

I can not remember its name so forgive me if asked not authentical. Maybe that was copycat.

Check this for example: https://miniverda.hu/go-szettek/carrera-go-62550-gt-race-off-versenypalya-szett.html?gad_campaignid=17701675811

I had neither crossing nor turnouts so I can not say anything for dots. I know if you create shortcut your model can not work in real life and looks funny in model layout.

[Roter Brummer]

Beitrag gelöscht, da antworten sinnlos.

Bearbeitet vor 17 Stunden von Roter Brummer

[Roter Brummer]

vor einer Stunde schrieb Leslie:

I know if you create shortcut your model can not work in real life and looks funny in model layout.

Beitrag gelöscht, da antworten sinnlos.

Bearbeitet vor 17 Stunden von Roter Brummer

[Leslie]

Carrera models are not exist in MBS so I use Faller. I wish to use a small single cross regardless of its name.

If I create it becomes ugly because of overlapping. What do you suggest?

[Roter Brummer]

vor 52 Minuten schrieb Leslie:

What do you suggest?

Beitrag gelöscht, da antworten sinnlos.

Bearbeitet vor 17 Stunden von Roter Brummer

[Roter Brummer]

Beitrag gelöscht, da antworten sinnlos.

Bearbeitet vor 17 Stunden von Roter Brummer

[Leslie]

If I develop here then only 2 kind of answer you can get from me:

1: Sorry, no interest or ability (this can only when you ask direct for me),

2: Of course, as my time permits.

Any other answer I hold for myself.

I am very curious what shall be your words then.

[Leslie]

If I got an info first instead of ragging all becomes other way.

I searched Faller from internet and see this works completely different method than simple electrical lines. I can not got exaxt method yet but I see all models are correct.

So I wish only a simple cross and no other things.

[streit_ross]

Hallo @Leslie

Your wish will come true. You just have to wait a little longer and have a strong faith. Because Christmas is coming soon and that's when he'll be handing out his gifts. However, you have to fulfill one condition: Say goodbye to the model train studio. And thank you for your amusing words from a lost person in search of attention. We will think of you for a long time - or not. Guess which is more likely.

Till the Christmas come, talking about paprikash. 

streit_ross 

[BahnLand]

Hallo / hello @Leslie,

wenn Du die nur optische Überlagerung der beiden Fahrspuren in Kauf nimmst, kannst Du Dir die Kreuzungen einfach selbst bauen, indem Du ein beliebiges einspuriges Faller-Straßenstück auf die Platte ziehst (z.B. Content-ID 14BF164A-1901-425B-A1AB-62E1C80108FC) und dann mithilfe des 3D-Modelleditors einfach eine zweite Fahrspur mit anderem Startpunkt und anderer Neigung hinzufügst.
If you accept the only optical overlapping of the two lanes, you can simply build the crossings yourself by dragging any single-lane Faller road section onto the plate (e.g. Content-ID 14BF164A-1901-425B-A1AB-62E1C80108FC) and then simply add a second lane with a different starting point and inclination using the 3D model setup.

Hier als als Beispiel die 90°-Kreuzung, basierend auf einem 60mm-Straßenstück. Die Konfiguration der 60°-Kreuzung überlasse ich zur Übung Dir.
Here as an example the 90° crossing, based on a 60mm road section. I leave the configuration of the 60° crossing to you for exercize.

Wenn Du die optischen Überlagerungen vermeiden willst, musst Du ein neues 3D-Modell basteln, das im 3D-Modelleditor als "Nur 3D-Modell" deklariert wird, und  dem Du dann die beiden virtuellen Fahrspuren hinzufügst.
If you want to avoid the optical overlays, you have to create a new 3D model that is declared as "3D model only" in the 3D model setup and to which you then add the two virtual lanes. 

Viele Grüße / many greetings
BahnLand

Bearbeitet vor 3 Stunden von BahnLand

[Leslie]

I have created this - nearly: from me road cuts are continuous - present at layouts. I shall use this until development.

[Phrontistes]

Statement deleted.

Bearbeitet vor 2 Stunden von Phrontistes
It is pointless to answer.

[Leslie]

I have no need 45°, I created 90° and it is sufficient, available at my layout. If you correct paint errors feel free publish it under your name.