Jump to content
Zum Start hinzufügen

Weitere Informationen

3D-Modellbahn Studio

Eine Vollbild-App auf Ihrem Startbildschirm mit Push-Benachrichtigungen und mehr.

So installieren Sie diese App auf iOS und iPadOS
  1. Tippen Sie auf das Teilen-Symbol in Safari
  2. Scrollen Sie durch das Menü und tippen Sie auf Zum Startbildschirm hinzufügen.
  3. Tippen Sie oben rechts auf Hinzufügen.
So installieren Sie diese App auf Android
  1. Tippen Sie auf das 3-Punkte-Menü (⋮) in der oberen rechten Ecke des Browsers.
  2. Tippen Sie auf Zum Startbildschirm hinzufügen oder App installieren.
  3. Bestätigen Sie durch Tippen auf Installieren.

Empfohlene Beiträge

Geschrieben

Hello everybody.

:D No, just a joke, when I saw my ugly gbs control panel … a title was found. :D 

spider06.thumb.jpg.d46948e8f0b2c3b94b467df6ee14516a.jpg
In this layout you can swith automatic on / off. When off you have some limited influence on where the trains are going. But even then the routes control the safety of the rolling stock.
With the use of reserved tracks ( yellow ) or occupied tracks ( red ) you can handle the rolling stock.

Do not use the signals and/or track switches directly on the gbs panel. It is not conform with the built in routes.

Thanks for looking, have fun ! Kind regards, Herman.   D57E7A2A-1F2A-4A80-A716-571FE168F22D   V8

spider01.thumb.jpg.015787874f82335ab9f2520f05a782d7.jpg

spider02.thumb.jpg.e4e4c77fc0b381a7b123b942f55eb5fc.jpg

spider03.thumb.jpg.737893787da25fd5f9c2addd85c21dfe.jpg

spider04.thumb.jpg.fe89c33f824b5c1c9b6b1e1ff7b7aa9f.jpg

spider05.thumb.jpg.94b163dceeb80e96c82bef1943e382bb.jpg

Bearbeitet von Herman
typo

Geschrieben

Hallo @Herman,

Screenshot2023-06-30115843.thumb.jpg.28b35e74250ffa254c13273dfda0caf6.jpg

To protect the switches in the signal box make that:

Screenshot2023-06-30115756.thumb.jpg.eef6a95e95aa39ab85df5f7f507a98ac.jpg

There ist a level-objekt (model ID D20B82EA-471D-4BF5-83FD-C87F3DD19CE9).

A 100% transparent level-objekt is never visible so I had it to mark manually.

To adjust the height of the level object set transparency temporary to 0:

Screenshot2023-06-30122515.thumb.jpg.a02b2b5397d0c60622afa123b3973cb4.jpg 

You find my example (as above) in layout 02380CEE-EE17-40D3-9B6A-8E9949C96FE0.

Kind regards

Phrontistes

 

Bearbeitet von Phrontistes
addition

Geschrieben
  • Autor

Hello @Phrontistes , thank you for the tip. 
Kind regards, Herman

Geschrieben
  • Autor

Hello to all, thanks to the tip from @Phrontistes , the GBS panel is now protected against changing the signals and/or track switches directly. Same ID nr.
Altough this is possible, I did prefer not to do the same in the layout. The warning stays, do not change signals and or track/switches directly in the layout.

In the Gbs panel it was really needed, a wrong 2x click in the In the surroundings of the buttons can happen easily. 

Have fun, thanks for looking.
Herman

Bearbeitet von Herman

Geschrieben
vor 2 Minuten schrieb Herman:

Altough this is possible, I did prefer not to do the same in the layout.

Me too. If you covered the whole layout, you wouldn't even be able to put on a vehicle or clean up an "accident" without special knowledge: You would have to know that you would have to make a layer-object that is actually invisible but displayed as visible invisible :/.

Kind regards

Phrontistes

  • 1 Jahr später...
Geschrieben
  • Autor

Hallo, Konvertiert für v9 Lichteffekte

spider02.thumb.jpg.7b5387616e62203005da7f280bc4fa3c.jpg

spidersweb01.thumb.jpg.2dc1e152d58c3d8fc77a13e7c0d19803.jpg

 

Mit freundlichen Grüßen, herman
D57E7A2A-1F2A-4A80-A716-571FE168F22D

Bearbeitet von Herman

Erstelle ein Benutzerkonto oder melde dich an, um zu kommentieren

Push-Benachrichtigungen konfigurieren

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.